It consists of Feeders for the Motors, Feeders are generally designed according to the ratings of the Motors, like KW, HP etc. In most of the MCC Panels the provision for Auto/ Manual with remote Starters via Push Button Sub Stations are installed. With manual provision, motors can be operated manually. The MCC is basically used for the Protection and safety of motors, enabling Motors safe run and Longevity of Motors. These types of Panels are generally used in Rice Mill Projects, Flour Mill, Cement Factory, Wire Industires basically all types of Production Units. The MCC also provides the benefit of enhances operator safety.

Consisting of a Main Distribution Board (MDB), Sub Main Distribution Boards (SMDBs) and Final Distribution Boards, by which the electrical energy is transmitted via branches to reach the exact end user.
An MDB is a panel or enclosure that houses the fuses, circuit breakers and ground leakage protection units where the electrical energy, which is used to distribute electrical power to numerous individual circuits or consumer points, is taken in from the transformer. An MDB typically has a single or multiple incoming power sources and includes main circuit breakers and residual current or earth leakage protection devices. A MDB is comprised of a free standing enclosure, a bus bar system, MCCB's, metering and support equipments and required current transformers. Panels are assembled in a systematic manner such as incomer section and outgoing section.

Capacitor Panels improve the power factor by adding capacitive reactance in steps as per the power factor requirement.Power factor controller constantly monitors the load (and power factor) of the system on LV Panel and switch on/ off the capacitor steps to maintain the system power factor to the set value. It provides optimum power factor improvement to compensate for lagging Vars in the system, seen as a clean and reliable solution to providing quality power to the distribution network and to economize the electricity charge to customer/consumer.

AMF Panel & Battery Chargers are used where the generators are installed between main AC and load. It will Start and Stop the Generator automatically and Changeover the EB/Generator lines.
Models & Amps/ Kva Rates: 15Kva, 25Kva, 40Kva, 60Kva, 80Kva, 100Kva, upto 600Kva and more.